Many people are asking us what precautions should be taken when installing a burner. Today, we will explain to you what precautions should be taken when installing a burner.

1. Electrical wiring

2. For safety reasons, this device must be effectively grounded and installed in accordance with current safety regulations;

3. Meeting all safety requirements is crucial. If you have any doubts, please have qualified personnel carefully inspect the electrical wiring;

4. The manufacturer is not responsible for any equipment damage caused by incorrect grounding;

5. Inspectors must inspect the system to ensure that the maximum power indicated on the nameplate can be provided to the equipment;

6. The provided electricity can be fully received by the device;

7. It is not allowed to connect the device to the main power line using adapters, multiple output sockets, and/or extension cables;

8. According to current safety regulations, connect the device to the main power line using a separate switch;

9. When using electric equipment, there are some basic common sense;

10. Do not use damp or watery parts of the body, or come into contact with the device barefoot;

11. Do not drag the wires; Do not expose the device outdoors (rain, sunlight, etc.) unless explicitly required to do so;

12. Do not allow children or inexperienced personnel to use the equipment;

13. The input wires of the device cannot be replaced by the user themselves.

If the wiring is damaged, please turn off the equipment and contact qualified personnel to replace it. If the device needs to be stopped for a period of time, the power switch of all electric equipment in the system (such as pumps, burners, etc.) should be disconnected. Burning gas or other fuels.

Burners should be installed by qualified personnel in accordance with relevant laws and regulations; The manufacturer is not responsible for any personal injury or property damage caused by installation errors. It is recommended to clean the interior of the fuel supply system pipeline before installation, and remove all external objects that may affect the operation of the burner.

1. Before commissioning the burner, the commissioning personnel shall check the following items:

2. Check if the fuel supply system is properly sealed;

3. Check the fuel flow rate to ensure that it has been set according to the requirements of the burner combustion rate;

4. Check the combustion system of the burner to ensure it is used for designing the fuel type;

5. Check the fuel supply pressure to ensure it is within the range specified on the nameplate;

6. Check the fuel supply system to ensure that the size of the system can fully meet the requirements of the combustion rate of the burner, and that the system is equipped with all relevant equipment;

7. The safety equipment and control equipment specified in the regulations;

8. If the burner needs to be shut down for a period of time, the fuel supply valve should be closed.