The igniter has simple structure and reliable action;

The main combustion part can be high-low-off control or PID proportional adjustment;

Design a safe and reliable flame detector;

Designed with 2mm thick high strength air reverse plate;

The box is made of titanium stainless steel material, which is more resistant to high temperature and corrosion;

Fuel and air mixed, nitrogen compound emission is low, do not need additional burning air, save energy;

For air or low temperature recirculation gas heating, in direct contact with the heating element;

The linear gas nozzle design enables the heat energy to be distributed very evenly in the hot air system;

High proportion of non-polar firepower adjustment energy saving to achieve accurate temperature control, rapid warming and energy saving effects;

Increase fan linkage, so that the ratio of air and gas is more accurate and achieve full combustion effect;

Through self-inspection and control of the entire production process;

Through the self-detection and evaluation of the system network, which lines and equipment are detected, so that there is no need to worry about it and it can be solved in time.

2. Typical industrial applications

(1) Baking oven

Coating drying curing: such as baking paint, electroplating, electroplating, plywood, resin and other baking.

(2) Drying furnace

Material drying: such as fiber, food, printing, rubber, wood, agricultural products and other moisture removal.

(3) Heating furnace

Including: preheating furnace, pre-treatment furnace, foaming furnace, heat setting furnace, combustion degreasing furnace, etc.

(4) Deodorization treatment

Including: direct combustion deodorization, catalytic deodorization, etc.

(5) Other industrial applications requiring large capacity cleaning hot air.

3. Installation method

(1) Suction method: the circulating hot air is inhaled into the furnace, and the circulating windmill is behind the fire, usually called the use of negative pressure.

(2) Loading method: The circulating hot air is blown out and sent into the furnace, and the circulating windmill is in front of the fire, usually called the use of positive pressure.

4. Precautions for installation

(1) The burner must be installed in the central part of the pipeline.

(2) The wind speed through the burner must be equal.

(3) The distance between the burner and the pipeline and the distance between the burner must be kept above 100mm.